M12 Studs (set of 10) for XE Alloy Block Kit
- CNC machined from EN24T
- M12x1.75 on the one end. This is for upgrading the thread from M11 fine to M12.
- The block will have to be tapped to suit but is a must for high power turbo engines as the thread is stronger than original.
- The Shank is 11mm to suit standard heads so to retains the original size so no further modification is required to head or head gasket. Completely interchangeable. Thread on head side in 7/16 UNF the same as ARP stud kits.
- No nuts included.
- Overall length
Available delivery options to United Kingdom
| 1st Class Tracked & Signed 1-2kg |
£12.25 |
| 1st Class Tracked & Signed upto 61cm |
£14.95 |
